|
The ELK Magic Module™
Series
|
| Here's a low
cost innovation that puts you in complete control of a host of
devices, from home appliances, security equipment, lighting and more.
Have you ever had one of those jobs where you found yourself
saying...?
"If I
could only..."
- Sense that switch
- Read that voltage
- Toggle that relay
- Time that event
- Determine date & time
- Read that temperature
- Control X-10® units
- Announce that message
- Read iButton™ devices
|
Now you can do all that, and
more!
Write your own programs using the included integrated development
software. Then, download your program into the Magic Module and
you're ready to run! |
|
|
Magic Module™
|
The heart of
the ELK Magic Module™ System is the Magic Module™
(ELK-MM443) Programmable Logic Controller (PLC). This module has four analog or digital
inputs, four relay outputs, and is capable of controlling two-way X-10® functions and
can be networked to a personal computer and/or up to 31 other Magic Module™
bus devices.
You can control
almost any device with this controller, making it a powerful and versatile
central unit in residential, retail or industrial automation markets.
More
Magic Module information
|
|
ELK-MM443
|
|
|
Magic Module Programming
There are multiple ways to program your Magic Module™
as noted below. You can download and try out the programming software before you buy. Download
the Programming Software for Windows 95/98. Includes Application Writer, Code Editor, Magic Control Screen.
Note: You must have the ELK-MK400 or the ELK-MK485 Kit to program a Magic
Module™
- ELK Application Writer
was designed to allow non-programmers the ability to
program and utilize many of the home automation features of the
Magic Module™
- ELK Code Editor is a Basic-like language compiled
into code bytes that the microprocessor reads and executes
through a built in operating system.
- Magic
Control Screen is graphical buttons that can be programmed to control home
automation functions from your PC using the Magic Module™.
|
Accessories for the
ELK-MM443
With these optional accessories,
the ELK-MM443 can read Temperature, Time/Date, Wiegand Proximity devices, Dallas
iButton™ identification devices.Pre-programmed
Kits controlled by the ELK-MM443
Factory Pre-configured & pre-programmed Kits.
|
|
|
Recordable Voice Module
|
Adds
voice or sound capabilities to your Magic Module™.
Issue instruction, greeting, or warning messages automatically. Great for theme
parks, industrial processes, waiting rooms, or for home automation. Features separate message channels. Playback commands are received via a published data protocol from
automation controllers (Magic Module™
(ELK-MM443), or most any equipment having an RS-232 or RS-485 port, including a personal
computer. Channels are pre-recorded but may be custom recorded utilizing the
on-board microphone or downloaded WAV files.
(Replaces the ELK-MV120).
More Recordable
Voice Module Information
|
|
ELK-MV480 (Replaces the
ELK-MV120)
|
 |
|
Two Input, Two Output
Programmable Controller
|
The Magic Module's(ELK-MM443)
little brother.
This ELK-MM220 controller can stand
alone as a controller for appliances, devices, etc. There are two
independently programmable digital inputs, and two relay outputs. Programs
with ELK Starter Kit (ELK-MK400). Powered by 12Vdc. Relays: 12A at 28Vdc; 12A
at 125Vac.
More MM220
Information
|
|
ELK-MM220
|
|
|
Magic Module is a trademark of ELK Products,
Inc.
iButton is a trademark of Dallas Semiconductor
X-10 is a trademark of X-10 USA
|
|
