|
Accessories for the Magic Module™
(ELK-MM443)
|
|
|
Clock/Calendar Module
|
Adds “real
time reference” (Minute, Hour, Weekday, and Monthly)
capabilities to your Magic Module™
System. This
enables programming event schedules for example, turning on the
lights, locking the doors, arming the alarm system, etc.). It
also provides the connection for the Temperature Sensor Module(ELK-MT100)
(optional). This board plugs into the Accessory Connector(J1) on the Magic
Module™.
More
Clock/Calendar Information
|
|
ELK-MC100
|
|
|
|
Temperature Sensor
|
Allows the Magic Module™ to monitor ambient temperatures and control
functions through programming. The Sensor can be remotely located up
to 20' from the Module to an area where temperature measurement is
desired. The Sensor connects via a 4 conductor cable to the terminals
of either an ELK Clock/Calendar Module(ELK-MC100) or the supplied
Interface board. This board is plugged onto the Magic Module™ Accessory
Connector(J1).
More
Temperature Sensor Information
|
|
ELK-MT100
|
|
|
|
iButton™ Reader & Interface Pack
|
This pack contains components that allow the Magic Module™ to
read iButton™ from Dallas Semiconductor. This enables the Magic
Module™ to be used as an economical high security access controller,
time-attendance functions, etc. The small "dime sized"
iButton™ is a rugged memory device containing a uniquely readable
"non-repeating" serial number. The
iButton™ is simply
momentarily touched to the reader in order for a read
to occur. The iButton™
Reader Interface connects to the Magic Module™ J5 connector through
an 8 pin 6' modular cable (included). The reader probe is mounted on a
stainless steel faceplate and
is wired into the interface. A package of 10 iButton™ keys
with key ring holders (ELK-MA101) are
available.
More iButton
Reader Information
|
|
ELK-MA100
|
|
|
|
Proximity/iButton™ Reader
Interface
|
This Interface can be used with one or two Proximity
Readers (26 bit Wiegand output), one or two Dallas iButton™ probes, or
one of each. This enables the Magic Module™ to be used as an economical
access controller for one or two doors, or for a single door with
anti-passback or time-attendance functions. The Proximity/iButton™
Reader Interface connects to the Magic Module™ J5 connector through an
8 pin 6' modular cable (included).
More Proximity/iButton
Information
|
|
ELK-MA290
|
|
|
|
Magic Module is a trademark of ELK Products,
Inc.
iButton is a trademark of Dallas Semiconductor
|
