| Multi-Channel
Recordable Voice and Siren Driver Module |
Listen
to examples of the ELK-120
|
| ELK-120 v.2
(Version
2) |
| The ELK-120 v.2
features 4 channels that can be configured as 2 channels of siren
and 2 channels of voice, or all 4 channels can be used for voice.
Either way the voice channels are fully recordable and are stored in
non-volatile re-programmable memory. Total time of recording is 8 minutes. The Siren
channels offer a choice of: Classic Yelp Sound, Temporal Coded Horn,
or Pulsing Industrial Horn. |
| The
siren sounds can be triggered in sequence with the voice channels. The channels can be
configured to play once or to repeat endlessly. Two channels support our unique ComboTrigger
feature, especially designed for controls that have a single alarm
output with a pulsing option for fire or burglary. When pulsed, the Temporal
Coded Horn fire signal is sounded. The optional ELK-129 Computer Interface may be used to
download .WAV sounds from a PC to the ELK-120. Also available is the ELK-124 offering
eight
recordable voice channels
of 1 minute each. |
Four Channels Configurable as: Two Siren and Two Recordable Voice OR Four Recordable Voice.
Maximum record time is 8 minutes divided between the number of voice channels.
Siren Sounds: Classic Yelp Siren, Temporal Coded Horn, and Steady Industrial Horn.
Temporal Coded Horn meets ANSI standard for Audible Emergency Evacuation Signaling.
Recordings stored in non-volatile memory.
Voice channels accept momentary triggers.
"One Shot" or Continuous voice playback settings.
Option to trigger +V1 and or +S3 channels from a steady or pulsing input (ComboTrigger)
Built-in condenser microphone for recording.
Adjustable speaker volume and current draw.
Powerful 24 watt audio amplifier for Speakers.
Line Level Output Jack for Paging Systems and Amplifiers.
PC sound card interface connector.
Lifetime Limited Warranty.
|
Operating Voltage:
Current Draw:
Sound Level:
Max. Speaker Loading:
Max. Message Length:
Pulsing Input:
Size: |
11 to 14
Volts DC.
.2 to 2 Amps, (depends on volume setting & speaker load).
120 db @ 1 meter, 14 vdc, with one 8 ohm speaker.
4 Ohms.
2 min. per channel in voice mode or 4 min. per 2 channels in siren
mode.
1/2 to 2 Second Pulse, 50% duty cycle.
3" x 5" x 1.25" (76 x 127 x 32mm). |
To order
the ELK-120
Call your nearest distributor
or ELK at 1-800-797-9355
for more information |
|
|
