| 10 Watt
Audio Amplifier |
|
| ELK-800 |
|
The ELK-800 is a great compact public address audio amplifier. It may be connected to
a telephone system paging output, a microphone, or even an ordinary single
line phone set (see Basic PA system below). The audio source is amplified up to 10 watts,
adjustable from an on-board volume control. Remotely installed, it saves money by requiring
only 22 - 24 gauge telco or
alarm type wire. It operates on 12 to 24 volts AC or DC and
can also drive multiple speakers. |
• 10 Watt Amplifier
• Expanded Telephone System Paging
• Does Not Require 25 or 70V Line Transformers
• Multiple Speaker Hookups
• Requires only 22-24 gauge telco wire
• Built-in Volume Control
• Compact Size
• Surface Mount ABS Enclosure with Snap-On Cover
• Lifetime Limited Warranty |
• Rated Output:
• Operating
Voltage:
• Speaker (Output) Load:
• Current Draw:
• Input Impedance:
• Enclosure Size: |
10 Watts**
12 to 24 Volts
AC or DC**
2 to 16 Ohms**
50 to 800 mA, Depending on Load and Volume Setting
1000 Ohms Nominal
4.5" x 3" x 1.2" (111.8mm x 76.3mm x 29.2mm) |
View the ELK-800
Data Sheet in Adobe Acrobat
format (right-click to save document to your hard drive)
View the
ELK-800
Instruction Manual in Adobe Acrobat
format (right-click to save document to your hard drive)
**NOTE: The ELK-800 is primarily designed for short duration
(intermittent) paging applications. For long durations, such as playing
music, you may need to reduce the volume output, or lower the power input
voltage, or lower the speaker loading in order to keep the ELK-800 from
overloading and shutting down.
|
To
order the ELK-800
Call your nearest distributor or ELK
at 1-800-797-9355 for more information |
|
|
