Telephone & Low Voltage Power Line
Surge Suppressor |
|
| ELK-950 |
|
The ELK-950 is an RJ31/38X Telephone Jack containing solid state transient
suppression designed to protect both the
Telephone and Low Voltage AC Transformer inputs on an alarm control. It
responds to power surges and transients in less than 1 nanosecond,
automatically restoring after each surge within the specified
ratings. The ELK-950 is compact and easy to install and features high quality,
clearly labeled screw terminals, 8 pin modular phone connector, built-in tamper
loop, and automatic shorting pins for cord removal.
|
|
The ELK-950 is FCC
Registered under part 68 and eliminates the need for a separate RJ31X telephone
jack. The AC Transformer inputs may alternately be used for surge protecting
data transmission wires such as a keypad or zone expansion bus,
as long as any measurable voltage on the two data wires is less
than 24 volts.
|
• Superior Solid State
Surge Suppression
• Rapid Response Time
• Protects Incoming Telephone Line
• Protects AC Input from Transformer
• Clamps Line-To-Line & Line-To-Ground
• Self-restoring After Surges Within Ratings
• RJ31/38X 8-Pin Modular Jacks
• Convenient Test points for Lineman's Test set
• Surface Mount Enclosure
• Screw Terminals Provided For Telco In-Out & AC Power
• Lifetime Limited Warranty |
• Response
Time:
• Breakover Voltage:
• Peak Pulse Current:
• Max AC Input Voltage:
• Ground Wire:
• FCC Reg. No.
• Size: |
< 1
Nanosecond
300 Volts on Telephone Line, 50 Volts on AC line
100 Amps
24VAC
24" - 14 Gauge Stranded
5K6USA-23140-XP-N Ren No. 0.0B
4.4" x 3" x 1.15" |
To
order the ELK-950
Call your nearest distributor or ELK
at 1-800-797-9355
for more information |
|
|
