The ELK-MT100 Temperature
Sensor allows the ELK Magic Module™(ELK-MM443) programmable controller to
monitor ambient temperatures and control functions through programming. The
Sensor can be remotely located up to 20' from the Module to an area where
temperature measurement is desired. The Sensor connects
via a 4 conductor cable to the terminals of either an ELK Clock/Calendar
Module(ELK-MC100) or the supplied Interface board. This board is plugged onto
the Magic Module™ Accessory Connector(J1).
FEATURES:
• Adds Temperature Functions to the ELK Magic Module(ELK-MM443)
• Measures Non-Condensing Indoor / Outdoor Temperature
• Interfaces to Accessory Connector(J1)
• Simple 4-Wire Connection
• Lifetime Limited Warranty
SPECIFICATIONS:
• Temperature Resolution:
• Operating Voltage:
• Current Draw:
• Size:
-55°C to +125°C(-67°F to 257°) in 1° Celsius increments
5 Volts DC, supplied from ELK-MM443
1mA DC, supplied from ELK-MM443
2.4" x 2.3" x 1"
View the ELK-MT100
Instruction Manual in Adobe Acrobat
format (right-click to save document to your hard drive)
Magic Module is a trademark of ELK Products, Inc.
To
order the ELK-MT100
Call your nearest distributor or ELK
at 1-800-797-9355 for more information
