ELK-M1EZ8MSI Main Serial Interface

M1EZ8 Main Serial Interface

ELK-M1EZ8MSI

The ELK-M1EZ8MSI Main Serial Port Interface allows direct RS-232 Serial Communications to an M1EZ8 Control for Upload/Download programming, and for interfacing with other Computer type devices. Also required when adding the M1XEP Ethernet Port to an M1EZ8 Control. The speed of this port is software selectable from 300 to 115,200 baud.

FEATURES:

Adds A High Speed RS-232 Serial Port To Any M1EZ8 Control
Allows Computers And Other Serial Devices To Communicate With The M1EZ8 Control
Self-Powered From The Control
Modular Connectors For Long Term Reliability
Powerline Lighting Pass-through Connector For PSC-05 (or equiv.) Interface

SPECIFICATIONS:

Gold Plated RJ45 8-Wire Modular Connectors
DB9F Female 9-Pin RS-232 Serial Connector
Operating Voltage: 12 Volts D.C.
Current Draw: Less Than 5mA
Housing Dimensions:
4.375" x 3.0" x 1.125"
Circuit Board Dimensions: 3.5" x 2.75

NOTE: The M1EZ8MSI is not required in order to connect ELK-M1XSP Serial Port Expanders to the 4-wire data bus. The M1XSP Expanders can provide RS-232 Serial Ports (up to 7) from the M1EZ8, however only M1EZ8MSI Main Serial Port Interface is capable of operating at a speed above 38,400 baud which is optimum for fast upload/download programming and for interfacing with an M1XEP Ethernet Interface.

View the ELK-M1EZ8MSI Installation Manual in Adobe Acrobat format (right-click to save document to your hard drive)

To order the ELK-M1EZ8MSI
Call your nearest distributor or ELK at 1-800-797-9355 for more information

[ Home ] ELK Products, Inc. P.O. Box 100, Hildebran, N.C. 28637 USA (828) 397-4200 Copyright © 2008 All rights reserved Terms and Conditions

[ Home ]
ELK Products, Inc. P.O. Box 100, Hildebran, N.C. 28637 USA (828) 397-4200
Copyright © 2008 All rights reserved Terms and Conditions