| M1
Single Door Access Module |
| ELK-M1KAM |
|
The
ELK-M1KAM is designed for access control.
It is a single door access interface module for use on the
M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire
keypad data bus in place of a traditional M1 Keypad. Since the
maximum number of keypads on an M1 or M1EZ8 is 16, the maximum
number of M1KAM modules (and controlled doors) is 16, minus
any installed keypads. Even though an M1 Keypad can accept a
26 bit access reader, the M1KAM is a more powerful and less
expensive access solution. For example; the M1KAM includes a relay
(door unlock) output with form "C" dry contacts, making
it compatible with most door lock devices regardless of the
voltage rating and style (AC or DC). The M1KAM accepts many types
of card swipe or proximity readers conforming to the 26 bit
wiegand format. As an added benefit, the M1KAM also accepts
Dallas
"One-Wire" iButton readers/devices. The M1KAM also has
additional inputs and outputs, including: a request to exit (RTE)
button or device and a Door Contact (Sensor) input. Outputs on the
M1KAM consist of a voltage output for Door Held Open Alarm, a
voltage output for System Ready to Arm, and a voltage output for
System Armed. The M1KAM is mounted in a universal surface mount
plastic housing with knockouts for surface mount raceways. |
|
|
|
|
FEATURES:
-
Input
for a 26 bit Wiegand Reader, such as
ELK-106055
-
Input
for a
Dallas
"One-Wire" iButton Reader, such as ELK-MA100
-
Heavy
Duty Form "C" Relay Contacts for Switching Door
Strike Power
-
Low
Current (50mA) Switched Negative (pull to ground) Output for
“Door Held Open” Alarm
-
Low
Current (10mA) Switched Negative (pull to ground) Output for
“System Ready To Arm” indication
-
Low
Current (10mA) Switched Negative (pull to ground) Output for
“System Armed” indication
-
Supervised
Input for RTE (Request To Exit) Button/Device
-
Supervised
Input for Door Status Sensor
-
Installs
in place of an M1 Keypad and operates from the RS-485 4-Wire
Keypad Data Bus
-
Four
selectable Time settings for "Request to Exit" and
"Door Held Open"
- Hardware
Watchdog Circuit
|
SPECIFICATIONS:
-
Connections:
Unpluggable Screw Terminals, 16 Position
-
Operating
Voltage: 13.8 VDC
-
Current
Draw: Less than 30 mA with min. activity, 44 mA fully active
-
Housing
Dimensions: 4.25" x 6.375" x 2.125"
-
Circuit
Board Dimensions: 3.95" x 2.875" x
.95"
- Maximum
number of access modules and keypads per system: 16
|
|
| View the ELK-M1KAM
Instruction Manual in Adobe Acrobat
format (right-click to save document to your hard drive) |
|
To order the
ELK-M1KAM
Call your nearest distributor
or ELK at 1-800-797-9355 for
more information |
|
|
|
