| M1
Ethernet Interface |
| ELK-M1XEP |
|
Control home or business from a PC browser, anywhere! |
|
M1
VIRTUAL KEYPAD:
To preview the M1
Virtual Keypad, watch the screen below for 6 different screen
shots.
|
|
|
|
| The ELK-M1XEP
is an
Ethernet Device Server with a RS-232 Serial Port Interface. It
may be used to connect a Control in the
M1 Family to an Ethernet network using TCP-IP protocol for
programming, remote control and monitoring. It features a secure
embedded web server, with a user interface built
on a Java applet, and email event notification. A software
setup utility is built into
ElkRP (version 1.5.0 or later) for configuring the connection
setup, network password, etc. The M1XEP is factory defaulted
to obtain a dynamic IP address from a DHCP server (i.e. Ethernet
switch, cable modem, etc.), however it may also be
setup with a static IP address. |
 |
|
|
|
FEATURES:
-
Web
server with embedded Java applet "M1 Virtual Keypad"
-
Secure
connection with password protection and HTTPS encryption
-
Flash
Memory for Firmware Updating
-
Event
notification via E-Mail (SMTP)
-
Internet
Monitoring and Reporting Capability
-
URL
Updating using Dynamic DNS
-
TCP/IP
stack supporting the following protocols:
-TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP,
SMTP
-
Federal
Information Processing Standards (FIPS) 128 bit encryption
-
Integrated
802.3 compliant 10/100 Mbit network interface
-
RS232,
DB9M 9-pin serial port connection
-
Connects
to the M1 RS-232 Serial port (Port 0)
-
RJ45
8-pin Network Jack
-
2.1mm
barrel type power connector (center positive)
-
LED
Indicators for Power, Link, and Data
|
|
|
|
SPECIFICATIONS: |
-
Operating
Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
-
Current
Draw: approx. 300 mA
-
Housing
Dimensions: 4.25" x 6.375" x 2.125"
-
Circuit
Board Dimensions: 2.25" x 3.95"
-
ELK-W040A
Serial Ribbon Cable included
** Any required network
equipment, i.e. Ethernet switch, router, cable modem, etc.
including the plug-in power supply for the M1XEP,
MUST be
backed up with an adequately sized UPS (Uninterruptible Power
Supply) in order for the equipment to continue
operating during brief power outages. |
|
| View the ELK-M1XEP
Installation Manual in Adobe Acrobat
format (right-click to save document to your hard drive) |
|
To order the
ELK-M1XEP
Call your nearest distributor
or ELK at 1-800-797-9355 for
more information |
|
|
|
