Premium Products for Security & Automation

ProductsContactSupportWhere to buyEventsM1 TrainingProduct FeedbackSearch
M1 Serial Expander, Lighting/Thermostat Interface
ELK-M1XSP

Network with a broad range of other manufacturers products!

This is a "3 in 1" product for additional serial ports and for integration with lighting systems and thermostats.  Jumpers on the M1XSP select the appropriate application, connection, and protocol. Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1 Gold and M1EZ8 support up to 7 M1XSPs.  The communications baud rate is adjustable from 300 to 38,400 baud. The unit comes complete with cable and a black surface mountable housing.

FEATURES:

  • Adapts the M1 to various Lighting control products which use "serial" communications. I.E.,OnQ-ALC, PCS-UPB, Centralite, etc.

  • Adapts HVAC Communicating Thermostats from RCS, Aprilaire, and HAI to the M1 Cross Platform ControlÒ

  • Expands the RS-232 Serial Ports of the M1 Control

  • Operates from the M1 Data Bus

  • DIP Switch Address Settings

  • Jumper Options and LED Diagnostic indicator

  • On-Board EOL Bus Termination Jumper

  • Flash Memory for Firmware Updating

 SPECIFICATIONS:

  • Maximum Expandable Ports (Units)

  • ELK-M1G Gold - 7

  • ELK-M1 (Std) - 1

  • Operating Voltage: 12 Volts D.C.

  • Current Draw: 31mA

  • Housing Dimensions: 4.375" x 3.0" x 1.125"

  • Circuit Board Dimensions: 3.5" x 2.75

 

 
View the ELK-M1XSP Installation Manual in Adobe Acrobat format (right-click to save document to your hard drive)
To order the ELK-M1XSP
Call your nearest distributor or ELK at 1-800-797-9355 for more information
 
[ Home ]
ELK Products, Inc. P.O. Box 100, Hildebran, N.C. 28637 USA (828) 397-4200
Copyright © 2010   All rights reserved   Terms and Conditions