|
The ELK-M1XZW
is a radio transceiver interface designed to allow an
M1 Controller to interface with Z-Wave enabled devices.
Z-Wave technology is a
wireless bi-directional communications network consisting
of devices such as: Plug-in Dimmer Modules,
Wall Mount Switches and Dimmers, Plug-in Appliance
Modules, Motion/Occupancy Sensors, and HVAC Thermostats. The M1XZW
interface functions as a Z-Wave Secondary Controller OR as
a Z-Wave Static Update Controller
(SUC) for holding the Z-Wave system setup programming. The
interface connects to the M1 RS-485 data bus and is
enrolled and identified as a Type 5 Expander. As such, it
may be remotely located anywhere along the RS-485 data bus
within the maximum stated
distance limits. The housing is designed for wall mounting
and includes mounting screws and anchors.
Z-Wave is a
trademark of Zensys, Inc. |
|
|
M1
Controllers can be programmed to control Z-Wave network
devices based on any number of events using the powerful
rules engine. These events include, but are not limited
to:
-Time
-Alarm System Arm Status
-Status of Alarm System Sensors such as door contact,
motion sensors, etc.
-Task Activation
-Sunrise
/Sunset
– Light/Dark
-Etc.
M1 Controllers can also control Z-wave network devices
remotely. The M1Gold Control features a built-in,
telephone remote control. With the M1XEP
Ethernet Interface, both the M1Gold and M1EZ8 can
control Z-Wave enabled devices over the internet, without
the need for a dedicated, "24/7" server.
|
|
|
