| M1
System Expanders |
| Input
Expanders and Output Expanders |
ELK-M1XIN
M1 16 Zone Input Expander
Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or
M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used,
increasing total zones (inputs) to 208. |
|
|
FEATURES:
-
16
EOL Resistor Supervised Hardwire Zones
-
Operates
on the 4-Wire Data Bus
-
DIP Switch
Address Settings
-
Flash
Memory for Firmware Updating
-
Plug-In
Terminal Strips
-
Status and
Diagnostic LED
-
On-Board
EOL Bus Termination Jumper
-
Vertical
Mounting using ELK-SWG Glides(included)
|
SPECIFICATIONS:
-
Inputs:
Plug-In Terminals with Elevator Style Wire
Clamps
and Screws
-
Operating
Power Range:
9 to 14 VDC
-
Current
Draw: 65 mA
-
Size:
6" x 3.25" x .75" H
|
| View the
ELK-M1XIN
Installation Manual in Adobe Acrobat
format (right-click to save document to your hard drive)
|
|
ELK-M1XOV
M1 16 Output Expander,
Flying Voltage Leads
Adds 16 voltage outputs to M1 Gold or M1EZ8 Controls. Provides 2 plug-in,
8-pin flying lead connectors for triggering low current devices (50 mA
max. each such as: LEDs, relays, piezos, etc. Operates from 4-wire
data bus. Up to 12 Output Expanders may be used for a total of 208
outputs. The voltage outputs can be converted to relays (8 or 16)
using (1 or 2) M1RB Relay Board(s). |
 |
|
FEATURES:
-
16
Voltage Outputs
-
Operates
on the 4-Wire Data Bus
-
DIP
Switch Address Settings
-
Flash
Memory for Firmware Updating
-
Two
(2) - Twelve (12) Conductor "Flying
Lead" Wire
Harnesses
-
Voltage
Outputs may be converted to Relays using
M1RB Relay Boards
-
Status
LED with Diagnostic Display
-
Mounts
in Enclosure using ELK-SWG Glides, SWP3
Structured Wire Plate, or Double Sided
Foam Tape
|
SPECIFICATIONS:
-
Outputs:
12 VDC @ 50 mA each
-
Wire
Harness Length: 12"
-
Operating
Power Range: 9 to 14 VDC
-
Current
Draw: 65 mA Nom., 330 mA Max.
-
Size:
6" x 3.25" x .75" H
|
|
| View the
ELK-M1XOV
Installation Manual in Adobe Acrobat
format (right-click to save document to your hard drive) |
|
|
ELK-M1XOVR
M1 16 Output Expander,
8
Voltage & 8 Relays
Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8
Controls. Voltages
can be used to trigger low current devices (50 mA max. each). Relays
are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire
data bus. Up to 12 output expanders may be used for a total of 208
outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay
Board. |
 |
|
FEATURES:
-
8
Voltage Outputs
-
8
Single-Pole, Double-Pole Relay Outputs
-
Operates
on the 4-Wire Data Bus
-
DIP
Switch Address Settings
-
Flash
Memory for Firmware Updating
-
One
(1) - Twelve (12) Conductor "Flying
Lead" Wire
Harness
-
Voltage
Outputs may be converted to Relays using
M1RB Relay Boards
-
Status
LED with Diagnostic Display
-
Mounts
in Enclosure using ELK-SWG Glides, SWP
or SWP3 Structured Wire Plates, or Double
Sided Foam Tape
|
SPECIFICATIONS:
-
Voltage
Outputs: 12 VDC @ 50 mA each
-
Relay
Outputs:
SPDT rated for 7 Amps @ 28VDC,
10 Amps @ 125 VDC
-
Wire
Harness Length: 12"
-
Operating
Power Range: 9 to 14 VDC
-
Current
Draw: 65 mA Nom., 330 mA Max.
-
Size:
6" x 3.25" x .75" H
|
|
| View the
ELK-M1XOVR
Installation Manual in Adobe Acrobat
format (right-click to save document to your hard drive) |
|
|
ELK-M1RB
M1 Relay Board,
Plug-in (8 form ”C” relays)
May be plugged directly into an M1G, M1EZ8, M1XOV, or M1XOVR to convert
the voltage outputs into SPDT relays rated for 7A @ 30 VDC, 10A @ 125
VAC. |
 |
|
FEATURES:
-
8 Form "C" Relays,
SPDT Dry Contact
-
Heavy Duty Contact Rating
-
Low Current Draw.
-
Great For General Purpose
Switching.
-
Plug-in "Removable"
Terminal Blocks
-
LED Status Indicators on all 8
Relays
-
Twelve (12) Conductor Plug-in
Wire Harness
-
Mounts in Enclosure using ELK-SWG
Glides
|
SPECIFICATIONS:
7 Amps @ 28 VDC,
10 Amps @ 125 VAC
Wire Harness Length: 24"
Operating Voltage: 12 Volts DC
Nominal
Current Draw: 0 mA idle, 250
mA Max.
Size: 6" x 3.25" x
.75" H
|
|
| View the
ELK-M1RB
Installation Manual in Adobe Acrobat
format (right-click to save document to your hard drive) |
|
|
To order the
ELK-M1XIN, ELK-M1XOV, ELK-M1XOVR, OR ELK-M1RB
Call your nearest distributor
or ELK at 1-800-797-9355 for
more information |
|
|
|
