|
Visual
Notification for the Hearing Impaired
Doorbell
In
this example, when the doorbell rings the living room and bedroom lamps,
and the kitchen spot lights will turn on for 15 seconds.
WHENEVER Doorbell (Zn 10)BECOMES NOT SECURE
THEN TURN Living Rm Lamp [1 (A1)] ON FOR 15 SECS
THEN TURN Bedroom Lamp [2 (A2)] ON FOR 15 SECS
THEN TURN Kitchen Spots [3 (A3)] ON FOR 15 SECS |
For
this application, use the ELK-930
Doorbell Ring Detector. Below
is the hook up diagram for the ELK-930.
1.
Mount the ELK-930 at any convenient location along the
path of the two wires leading from the transformer to the doorbell.
2. Cut one of the two transformer wires. Strip the ends
and place one under each of the doorbell detector INPUT terminals.
3. Run a two conductor wire from the doorbell detector
output terminals to the automation controller or device to be activated.
4. Connect one wire from the "NEG" terminal to a
common NEG terminal of the controller. Connect the other wire from the
"OUT" terminal to one of the input zones on
the controller.
Telephone
In this example, when the telephone is ringing, the living room and
bedroom lamps and the kitchen spot lights will turn on for 2 seconds.
The flash of the lights will follow the pattern of the ringing
phone.
|
WHENEVER TELEPHONE LINE IS RINGING
THEN TURN Living Rm Lamp [1 (A1)] ON FOR 3 SECS
THEN TURN Bedroom Lamp [2 (A2)] ON FOR 3 SECS
THEN TURN Kitchen Spots [3 (A3)] ON FOR 3 SECS |
ELK
RP
Tip
Of The Week
Printing
You
can print the account that is open, a list of all accounts, the ElkRP log,
and, if multi operator access is enabled, a list of all operators.
From the file menu, click print.
Check the desired box and click print or preview.
Printing a list of accounts or the ElkRP log can consume a lot of
paper, so it is a good idea to preview if you are unsure of how many pages
will print. If you choose
“This Acct”, a screen will come up after clicking print or preview to
allow you to choose what information about that account you want to print.
Check the desired boxes and click okay.
From the preview screen, you can scroll through the pages using the
black arrows at the top of the screen. Click the printer icon at the top
left to print the document. You can also export the document so that it
may be saved or emailed. Click
the envelop icon at the top left of the screen.
Choose the format and destination for the file and click ok.
The next screen will ask if you want to export all or part of the
document. Select “All” to
export the entire document or select page range and enter the pages you
wish to export, and click ok. Finally,
name the file and click okay.
|
