 |
M1 Newsletter |
September 28, 2006 |
|||
|
How to Enable/Disable Non-Alarm Voice Messages The voice
annunciation feature of the M1Gold is helpful to keep the customer
informed with the status of the system, as well as announcing reminders,
etc. However, it may be
desired to temporarily disable the non-alarm voice announcements.
This can be accomplished with rules programming. The voice
announcements can be disabled based on time of day.
For example, it may be desired to disable the non-alarm voice
message at night. The rule
below will disable the non-alarm voices at
In the following rule non-alarm
voice messages are enabled at
The
following example shows how the non-alarm voice messages can be disabled
using an F key.
An unused or
“phantom” output (Output 100 in this example) is used to indicate if
the non-alarm voices are currently enabled or disabled.
The F key illumination event may be set to follow the state of this
output, giving the user a visual indication of the state of the voice
mode. |
|||||
|
Got Questions or Ideas? |
|||||