Break Bell for ELK-MM443
Download this Sample Program (editable with the ELK Code Editor)
For any business that desires to sound a “Break Bell” for employees at predetermined intervals daily. This application uses an ELK-MM443 with the Clock/Calendar accessory module(ELK-MC100) programmed to momentarily close relay 1 to sound a bell and optionally to transmit an X-10 signal to a remotely located X-10 chime unit. This program will sound the bell for 3 seconds and the X-10 chime (if connected) at 7:00, 9:00, 9:15, 12:00, 12:30, 3:00, 3:15 and 5:00 daily except Saturday & Sunday.

4 Zone Shunt for ELK-MM443
Download this Sample Program (editable with the ELK Code Editor)
This application uses an ELK-MM443 with the Clock/Calendar accessory module(ELK-MC100) programmed to shunt 4 security zones between the hours of Friday 12:00 noon through Sunday 12:00 midnight.

2 Door Man Trap for ELK-MM220
Download this Sample Program (editable with the ELK Code Editor)
The operation of the MM220 as a Man Trap works in the following manner. Input 1 from the telephone entry keypad opens the magnetic lock on door #1 for 5 seconds. Door #1 must be opened and then closed before a 7 second timer is started. At the end of the 7 seconds the magnetic lock on door #2 will open for 5 seconds. The person has 20 seconds from the time the code is entered to open and close door #1 before the code has to be re-entered. 

Single Zone Security Control for ELK-MM220
Download this Sample Program (editable with the ELK Code Editor)
This security system utilizes momentary Key Switch arming/disarming, a Normally Closed Burg Loop, an Alarm Relay Output, and a Status LED Output. It features an Instant or Delay mode with 30 second Exit and Entry timers. The Exit, Entry, and Alarm cutoff times can be changed by using the optional ELK-MK400 or ELK-MK485 Programming Kits and running the Wizard on the source file.

Magic Module is a trademark of ELK Products, Inc.