Power Distribution Module

ELK-PD9HC 400mA rated outputs

These Power Distribution Modules conveniently distribute a single A.C. or D.C. input into nine individual outputs, for centrally powering Video Cameras, PIRs, Photobeams, etc. Each output is protected with an auto-resetting PTC to protect a shorted output from disabling the other outputs. A visual LED power indicator is provided for each output along with a single Master Power On/Off Switch. The modules accept a 6 to 30 Volt A.C. or D.C. power source (not included) which connects either to the input terminal block or the 2.1mm D.C. power jack located on the module. Two or more outputs can be paralleled for additional current.



• Auto-Resetting (PTC) Overload Protection (NO FUSES to REPLACE).
• Master Power On/Off Switch.
• Visual LED Power Indicators on each Output.
• Convenient Test Points for measuring Total Current Draw.
• Lifetime Limited Warranty.
• Paintable White Plastic


• Max Current Draw:

• Max Combined Current Draw:
• Input/Output Voltage:
• Input Connection:
• Output Connection:
• Enclosure Size:
PD9 = 250mA from each output.
PD9HC = 400mA from each output.
Not to exceed Input Power Source.
6 to 30 Volts AC or DC.
Screw Terminals or 2.1mm Plug-In DC Jack.
Screw terminals (POS and NEG) for each output.
6.5" x 4.3" x 2".

ELKPD9HC ELK-PD9HC high current pd9 high current elk power distribution module high current ac power dc power elk power supplies elk power supply ac inputs dc inputs nine outputs 9 outputs elk-pd9 elkpd9 elk-pd9ac24 elkpd9ac24 elk-pd9dc12 elkpd9dc12

For more information, call ELK at (800) 797-9355.  To locate an ELK authorized distributor near you, click here.