26 M1 CONTROLS & ACCESSORIES M1 COMMUNICATIONS & CONNECTIVITY COMING SOON! ELK-M1XIP Network (IP) Interface for M1 Controls The ELK-M1XIP enables M1 Controls to communicate with Central Stations equipped with a Sur-Gard IP receiver while providing reliable system communication over an IP Ethernet network. Connecting directly to the M1 mainboard serial port, it replaces the legacy ELK-M1XEP and delivers many of the same trusted features. In addition, the ELK-M1XIP simplifies remote access with proxy-based connectivity, eliminating the need for complicated port forwarding or network configuration on the client’s network. 7 62158 55101 7 • Secure connection with password protection and SSL/TLS encryption • Event notification via e-mail (SMTP) • Internet monitoring and reporting capability • Allows synchronization of the M1G/EZ8’s clock with NTP (stratum-2) time server • Supports connectivity with partner apps and IP-based software and interface partners • 7-Segment display provides status and diagnostic information • Connects to M1 control via RS-232 serial port • LED indicators for power, link, and status • Flash Memory for firmware updating • Operating Power: 13.8 VDC • Current draw: 50mA • Board size: 6” x 3” x 0.6875” • Housing Size: 6.402" x 4.352" x 1.188" • RoHS Compliant 7 62158 55094 2 Dual Path (IP/Cellular) Alarm Communicator for M1 Controls (Verizon LTE) C1M1 Dual-Path Alarm Communicators transmit emergency messages to Central Stations significantly faster than communicators that use dial capture, data bus decoding or cloud servers. Full data communications are sent over IP or cellular pathways, increasing reliability. C1M1 allows remote access for programming or control of the M1 system, as well as local network connectivity with IP-based software and interface partners. C1M1 provides email and text alerts for arm, disarm and alarm events. • Dual reporting pathways: IP and cellular • Secure connectivity with encryption and password protection • Simplifies remote access, no port forwarding • Supports FREE ElkLink Mobile app • Supports connectivity with partner apps and IP-based software and interface partners • Email & push alerts for arm, disarm & alarms • 7-segment display and LED indicators provide status and diagnostic information • Connects to M1 control via RS-232 serial port • Operating Voltage: 12 VDC • Current Draw: Standby - 85mA, Max - 230mA • Size: 3.5" x 5.4" x 1.3" • RoHS Compliant ELK-WA003 Remote Antenna For use in areas with poor cell service. Installed in place of the supplied stubby antenna • SMA male connector • Magnetic base • 6m long cable • Color: Black • RoHS Compliant 7 62158 55092 8 ELK-USBCM USB Cable Use with on-board USB port of C1M1 to allow on-site programming with no need to connect through customer LAN • USB Serial A to mini-B cable • 60" long cable • Color: Black • RoHS Compliant 7 62158 55091 1 ELK-C1M1LTEV For Verizon LTE Network ELK-C1M1LTEA For AT&T LTE Network 7 62158 55096 6
View this content as a flipbook by clicking here.