38 M1 DATA BUS HUBS B. ELK-M1DBHR M1 Data Bus Hub for Retrofit Active RS-485 data bus hub for M1 retrofit of older panels with multiple home run, 4-conductor keypad/data wires with M1 Controls. The end of each cable is EOL terminated to insure proper operation and supervision. Must be located at main control. • Splits main data bus into 4 managed RS-485 branches • Each branch can have 2 parallel home run cables for total of 8 home runs • Works with standard 4 conductor home run wiring • Up to 2 hubs can be connected to the M1 board 7 62158 55037 9 A. ELK-M1DBH M1 Data Bus Hub For easy connection of expanders & keypads. The M1DBH accepts up to 9 RJ45 equipped CAT5 or CAT6 cables, and series connects the data A & B lines so the data bus may be terminated properly. • Designed for multiple home run cables • Internally connects Data A & B lines from previous device into next device out • Multiple Hubs may be connected for expansion • EOL Bus Termination accomplished on-board with included RJ-45 Terminator Plug 7 62158 55002 7 C. ELK-P212S Supervised Remote Power Supply This supervised remote power supply/battery charger provides 12 VDC output with up to 2 Amps of total current and supervises the AC power input as well as the rechargeable battery. When used with an M1 control, it can report abnormal conditions over the RS-485 data bus. • Data-bus supervision of AC and Battery status • Master AC and Battery ON / OFF Power Switch • Visual AC Power Indicator • Programmable relay output • Two (2) Year Warranty • RoHS Compliant • AC Input: 16.5VAC, 45VA (TRG1640 or equiv.) • DC Output Voltage: 13.8 Volts DC +/- 5% • Current/Wattage Rating: 2.0 Amps/30 Watts • DC Output Protection: Auto Resetting PTC • Rechargeable Battery Size: Max. 12 Ah • Low Battery Cutoff Threshold: ~10 Volts 7 62158 10212 7 SUPERVISED POWER SUPPLY FOR M1 A B C • Input Connectors: Elevator Screw Terminals • Output Connections: RJ-45, 8-Pin Jacks • Includes ELK-SWP3 Mounting Plate • Circuit Board Size: 5" x 2.5" x .75" • Easily snaps into ELK enclosure • RoHS Compliant • Inputs: Elevator Screw Terminals (4 position) • Output: Elevator Screw Terminals (4 position) • Includes ELK-SWG for easy mounting in ELK enclosures • Circuit Board Size: 4.9" x 2.75" x .5" • RoHS Compliant M1 CONTROLS & ACCESSORIES
View this content as a flipbook by clicking here.