30 D. ELK-M1KP3 • Blue/white LCD display • Four (4) Programmable Function Keys • Hinged door over the keys • Accepts "External" 26-bit Wiegand Prox Reader using ELK-W039A wiring harness • Surface mount only without electrical box • Programmable display of time & date • Current Draw: ~30 mA Idle (low back light, sounder silent) ~85 mA fully active • Size: 3.97" x 5.425" x 1.19" 7 62158 55061 4 ELK-M1BBK2 Recess Back Box for M1KP2 The M1BBK2 is an optional back box kit that allows the ELK-M1KP2 keypad to be flush (recess) mounted. • Used in place of standard surface mount back box • Size: 4.312" x 5.375" x 1" • RoHS Compliant 7 62158 55048 5 ELK-W039A M1KP2 & M1KP3 Proximity Reader Wiring Harness This two-pin cable is used to connect a 26-bit Wiegand reader (such as the ELK-106055) to the M1KP2 or M1KP3 keypad. • 22 Gauge Wire • Wire Length: 12" • RoHS Compliant 7 62158 55051 5 ELK-M1KP2 • Blue/white LCD display • Four (4) Programmable Function Keys • Accepts "External" 26-bit Wiegand Prox Reader using ELK-W039A wiring harness • Surface mounts to a standard 1 or 2 gang electrical box • Programmable display of time & date • Current Draw: ~30 mA Idle (low back light, sounder silent) ~85 mA fully active • Size: 4.658" x 5.5" x .95" (.375" D with recess mount) • Optional Recess Back Box Kit Available (ELK-M1BBK2); size: 4.312" x 5.375" x 1" 7 62158 55047 8 M1 CONTROLS & ACCESSORIES
View this content as a flipbook by clicking here.