32
A.  ELK-M1KAM
M1 Single Door Access Module
A single door access interface module for use with M1 Controls. It installs in place of an M1 Keypad and operates from the RS-485 
4-Wire Keypad Data Bus.
•	 Input for a standard 26-bit Wiegand Reader
•	 (3)12 VDC Outputs for Door Held Open Alarm(50mA), 
Ready To Arm, and System Armed indications (10mA)
•	 (2)Supervised Inputs for RTE (Request To Exit) Button/
Device and Door Status Sensor
•	 Four selectable Time settings for "Request to Exit" and 
"Door Held Open"
•	 RoHS Compliant
•	 Heavy Duty Form "C" Relay Contacts for Switching Door 
Strike Power
•	 Connections: Plug-In Screw Terminals, 16 Position
•	 Operating Voltage: 13.8VDC
•	 Current Draw: Less than 30 mA with minimum activity, 
44 mA fully active
•	 Housing Dimensions: 4.25" x 6.375" x 2.125"
•	 Circuit Board Dimensions: 3.95" x 2.875" x .95"
•	 Hardware Watchdog Circuit
7
62158 55052
2
ACCESS CONTROL MODULE & ACCESSORIES
C.  ELK-M1PRC
M1 Proximity "Clam Shell" Cards
For use with the add-on proximity readers: ELK-M1PR for the  ELK-M1KP keypad or ELK-106055 exterior reader.
• 	 Comes in packs of (10) ten
• 	 Credit Card Size
• 	 Color:  Off white
• 	 Size: 3.375" x 2.125" x .0625"
•	 RoHS Compliant
7
62158 55006
5
D.  ELK-M1PRF
M1 Proximity Key Fobs
For use with the add-on proximity readers:  ELK-M1PR for the ELK-M1KP keypad or ELK-106055 exterior reader.
• 	 Comes in packs of (10) ten
• 	 Attaches to key chain
• 	 Color: Black
• 	 Size: 2.125" x 1.3125" x .25"
•	 RoHS Compliant
7
62158 55007
2
7
62158 55044
7
B.  ELK-106055
Exterior Proximity Reader
Allows a proximity card or fob to be used with M1 Controls to quickly arm, disarm, operate a door strike, etc.
•	 Weatherproof - suitable for outdoor installation
•	 Size: 3.125" x 1 .875" x 1"
•	 Color: Black
•	 Operating Voltage: 12 VDC
•	 Current draw: 50mA
•	 RoHS Compliant
•	 Connects to M1 Keypads:
•	 M1KP & M1KPB Keypads use ELK-W035A harness
•	 M1KP2 & M1KP3 Keypads use ELK-W039A harness
•	 Can be used on any system that is 26-bit Wiegand 
compatible
•	 Requires M1PRC cards or M1PRF fobs
A
B
C
D
M1 CONTROLS & ACCESSORIES

View this content as a flipbook by clicking here.