Reply To: Unable to connect to M1G

[Francois]

Hi Brad,

On the M1XEP side, the M1XEP IP address is on the same subnet as the PC, ex. 10.28.22.56 for M1XEP and 10.28.22.111 for the PC. When I use the Find tool, I see the M1XEP.

For the serial connection, ELKRP2 is set to COM1 as assigned in Windows. I use the serial cable provided with the M1XEP between the PC and the M1G. The baud rate is 115200, but what should I use for the other serial parameters?
data bits:
Parity:
Stop bits:
Flow control:

Thanks

Francois Boucher