The Honeywell serial number is a 7 digit number located on the wireless sensor.
Have you enrolled the M1XRF2H?
Have you created a Wireless Group in ElkRP2?
If so:
- Under Zone (Inputs) click on your Wireless Group x
- Click on the zone number you want to configure
- Set the Zone Definition, Type and any other option you need to select
- Click “Wireless Setup”
- Check “Enabled”
- Supervised will either be 0 = Not Supervised for FOBs, 1 = Normal Supervision for Window/Door, 3 = Fire Supervision for Smoke Detectors
- In the H ID box enter the 7 digit serial number for the Honeywell Wireless Sensor
- In most cases the LOOP will equal 1 or reference the Honeywell instructions for the LOOP setting
- Click SAVE and Close the “Change Wireless Zone” window
- From the Zone page click “Send to Control” or “Send and Say”