Lost transmitter on keypad

[Jason Roberts]

On the M1 keypad – there is a “Lost Transmiiter” message.

How do run a report in Elkrp to identify which transmitter has lost signal?

[Brad Weeks]

Connect with ElkRP2 and once connected click the LOG icon and “Receive Entire LOG”. Once the LOG is received you can Save to File

[Jason Roberts]

In that location – there are 2 smoke and 1 CO detector – wireless. 1 smoke ocassionally disconnects and there is a “Lost Transmitter” message on the kepad – the others do not disconnect. I remove that smoke and it automatically beeps at the keypad.

The house if about 5000 sqft and those 3 detectors are in the cabana which is a connected but separate from the main house.

Last, there is a wireless door sensor just outside the cabana, which operates fine.

Any suggestions for the 1 smoke that keeps getting “Lost Transmitter”?

[Brad Weeks]

Is the Smoke Detector the ELK 6052 Two-way Smoke Detector? Remove the detector from the base and make sure the RF Board is fully pressed onto the mounting PINS.

[Jason Roberts]

These are 5800SMOKEV – I should have given the model.

[Author]

Posts