M1 Text Message Failure

[John Schumann]

FYI:

HW 0.13

Boot 3.3.6

Firmware 5.3.10

Program 2.0.41

M1G Control 5.0.41

Elk Comm2.0.2.2

Convert DB 1.4.12

John

[Brad Weeks]

Yes, you can delete the OLD Account. The M1 Serial Number is located on the bottom of the M1 Black Plastic Housing and is an 8 digit number starting with 0

[John Schumann]

I tried the new account (found serial number). Got it up and running, but still have the yellow conflict.  See my HW/FW versions above.

Any other ideas?

John

[Brent Wallace]

I am wondering if we are experiencing these conflicts because we all have disabled (but not deleted) rules in our list of rules? I keep these disabled rules in my rule list because I occasionally enable them when circumstance dictate. Also, some of them are complicated and required quite a bit of effort to conjure out of my brain so I don’t want to lose them. All disabled rules remain in the rule list but are shown in strike through text like this.

It is not a big deal to me to simply select the differences and send them to the system each time I connect but it would be nice to eliminate this step if I can.

[Author]

Posts