Select this option when using the M1XIP M1 Network (IP) Communicator to connect the M1 to the local network (LAN).
System URL/IP
This field specifies the address ElkRP uses to connect to the M1XIP. The field may contain an IP address or a URL.
- Local connection via IP: Enter the IP address assigned to the M1XIP on the local network.
Port
Enter the port number assigned to the M1XIP. This may be the secure port or the non-secure port, if enabled. The default secure port is 2601. The default non-secure port is 2101.
Connect Non-Secure
Check this box when connecting to the M1XEP using the non-secure port.
Use Proxy (ElkConnect)
Check this box to connect to the M1XIP remotely via ElkConnect Proxy. See the M1XIP Installation Guide for details on proper setup.
M1XIP Setup
Displays the M1XIP Setup screen, which contains tabs for configuring the various M1XIP features. Refer to the M1XIP Installation Guide for details.