› M1 Support Forum › Exit Requiring User Code On M1KPNAV › Reply To: Exit Requiring User Code On M1KPNAV
December 7, 2020 at 3:39 pm
#4462
ELK Tech Support
The “Quick Arm (Single or Double)” feature is enabled under Areas and is Global to all keypads assigned to that area. If neither Single or Double Quick Arm is checked then in order to Arm you will need to enter a valid code. When a Valid Code has been entered for example you’ve disarmed the system an internal 60 second timer is started (indicated by the clock icon running in the upper left-hand corner of the M1KPNAV screen) and during this time it is not necessary to re-enter the code. While the internal timer is running you can press the “Exit” key without having to enter the code and the system will arm Away Mode.