M1 Support Forum Telephone remote giving status but not executing control Reply To: Telephone remote giving status but not executing control

#5244
Charles Winterble

    Yes I tried several things.  I put in a simple task which should turn on an output and beep the keyboard which I tried to run via phone.  Next I simply tried to change an output to ON state over the phone. And last, I tried to arm the system from the phone .    The system seems to respond properly, asking for a security code, verifying it and going through the option menu. In each case the response was the same after I entered the # as requested, the system jumped back to reciting the main menu.  In the case of the arming request the system acknowledged system armed.  However the system did not arm and in the other cases the output did not change or the keyboard beep.  If I initiate the task or output changes thru M1toGo, every one of these tests works properly.  These tests were all over a local phone connection.

    Scroll to Top