The 6010 4 Button FOB can only be learned into One Zone. The Data (TxID) for the wireless sensors are stored in the M1 not the M1XRFTWM so it does not matter which M1XRFTWM receives the wireless signal it will pass the Data to the M1 for processing. In your application you want one FOB to control both gates and the 6010 has 4 buttons (1-4 OR hold the top two for button 7 or bottom two for button 8) . You could write your rules based upon the RF Button press to control the gates separately. “IF” using button 3 the “i” Inquiry button it needs to be pressed for ~8 seconds before the rule will activate.