M1 Support Forum Keyfob

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #7554
    Dean Ammann

      Can 1 Key fob be assigned to multiple XRFTW’S zones?

      I have a job with a 1500-foot driveway with 2 gates, upper and lower. I want one key fob to be used at both gates. Keep in mind one key fob will not reach both XRFTW locations at the same time.

      If so, can I also program each location XRFTW zone to control gate at that location (Upper or lower)?


      Brad Weeks

        The 6010 4 Button FOB can only be learned into One Zone. The Data (TxID) for the wireless sensors are stored in the M1 not the M1XRFTWM so it does not matter which M1XRFTWM receives the wireless signal it will pass the Data to the M1 for processing.  In your application you want one FOB to control both gates and the 6010 has 4 buttons (1-4 OR hold the top two for button 7 or bottom two for button 8) . You could write your rules based upon the RF Button press to control the gates separately. “IF” using button 3 the “i” Inquiry  button it needs to be pressed for ~8 seconds before the rule will activate.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top