› M1 Support Forum › ELKRP2 Connectivity Issue › Reply To: ELKRP2 Connectivity Issue
June 4, 2024 at 12:17 pm
#8056
Brad Weeks
In ElkRP2 under Setup, Options, Network Adapters in the dropdown you should see the IP of your PC on the Local Area Network which based on the Gateway should be a 192.168.10 xxx and the M1XEP should be at 192.168.10.yyy — is that what you have?
On the Account Detail Screen:
- System URL/IP should be the M1XEP at 192.168.10.yyy
- Port 2601
- Connect Non-Secure should NOT be checked
- Try the Connection again
If unsuccessful set the Port to 2101 and check the Connect Non-Secure and try the connection again