M1 Support Forum Showroom Integration with C4 AND Elan Reply To: Showroom Integration with C4 AND Elan

#8468
Matt Sirotzki

    Well I can officially say there was no issues with using the ELK and ip protocol on Elan AND C4.  Testing them both together didn’t show any weirdness.  There were a couple of things to make sture to do.  1. Enable “unsecure port” as per the chowmain C4 driver.  Switch elans connection to ethernet and select the unsecure port number.  That’s it.  The only gotcha is the elkrp2 will kill connectivity when connected but that’s no bid deal and expected (if you were using serial it would be the same thing)  I did not test the rs232 to ip adapter but since this works so good I think I am going to pivot and try the rs232 on caseta integration instead.  Thanks Brad!

    Scroll to Top