All Zones normal but M1G Says Not Ready to Arm

[Adebola Adekanmbi]

I have this issue going on now for a few weeks. All the zones in my ELK M1G shows normal status but the Keypad shows “not ready to arm”. When log in from M1 touch pro, the indicator switch back and forth from “red to green” at a sub-seconds rate. Should it matter, my system is integrated with Home Assistant which does work well.

All helps are welcome. Thanks.

[Brad Weeks]

If the keypad is displaying “Not Ready x(total number of zones not secure)Zones press the Up Arrow key to view which zones are not secure.

[Adebola Adekanmbi]

Good morning Brad. That is the issue, no zone is violated when the up arrow is press.

[Brad Weeks]

Take a screenshot of the keypad an forward to techsupport@elkproducts.com along with a PDF copy of the ElKRP2 programming

[Author]

Posts