- This topic has 1 reply, 2 voices, and was last updated December 7, 2020 at 5:43 pm by ELK Tech Support.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi all,
I remember a few years ago that there was a change to the specs that allowed the use of a DC power supply instead of an AC power supply – problem is I cant find any reference to it. Did I remember correctly that a DC supply can be used? Can I replace my supply with a DC supply and if so is there anything I need to do on the main board.
Thanks
ELK Tech Support
The M1 can be powered from an 18 VDC, 2 Amp or higher power supply connected to the AC input terminals.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.