M1 Support Forum Disable Rule via F key press

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4419
    M1 Installer

      I have a rule set to auto arm and disarm system at night. Is there a way to disable this function via an Fkey press? The only solution I use right now is manually connecting to M1 and disabling the rule in the rules list and sending it to control.

      Thanks

      #4519
      ELK Tech Support

        How do you have your rules written? You could try using a phantom unused Output as a flag— for example Output 17: Whenever F4 On Any Keypad is Activated Then Toggle Output 17 (in ELKRP, under Keypads for each F4 key set the Illumination Event to 7017 that way when Output 17 is ON then the F4 key LED will be ON indicating the Rule is disabled) Edit your existing rules to include an “AND Output 17 is OFF” For example: Whenever the Time is 11:00 PM And Output 17 is OFF (If Output 17 is ON the rule will be ignored) Then Arm My Home (Area 1) to Stay Instant Mode Whenever the Time is 6:00 AM And Output 17 is OFF(If Output 17 is ON the rule will be ignored) Then Disarm My Home (Area 1)

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top