ELK-6023 Recessed Door Contacts

M1 Support Forum ELK-6023 Recessed Door Contacts

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #5933
    Richard Reyes

    Using two of these for exterior doors.  The clearance on both are around 1/8″ and perfectly centered.  One of the sensors very intermittently has not been going back to normal state after closing the door.  The fix is to open and close the door and the state goes back to normal.  Today had the same issue on the second sensor.  Is this as simple as replacing the batteries?  They have been in service for about a year.  Seem to recall seeing batteries should last several years.

    #5943
    Brad Weeks

    Are these exterior doors metal? You may be having a range issue and perhaps moving the M1XRFTWM will help.

    #5944
    Brad Weeks

    Are these exterior doors metal? You may be having a range issue and perhaps moving the M1XRFTWM will help.

    #5945
    Richard Reyes

    Fiberglass doors.  One thing to note: I have an M1XRF319 and an M1XRFTWM mounted in the basement ceiling about 5 feet apart, maybe I should separate them further?  I will play around with locations like you suggested.  I also have to contend with a steel I joist.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Scroll to Top