M1 Support Forum Keypad Zone Names

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #4422
    M1 Installer

      Would like to name the zones according to their location in the house which would show up on the keypad display. If possible how can this be done. At this time zones are displayed by number.


      ELK Tech Support

        In ElkRP2 or through keypad programming you can change the Name of the Zone from the default Zone x to a new description for example Front Door = Zone 1. When the Zone is not secure the keypad will display a Total Number of zones which are not secure at which time you can press the UP arrow key to scroll through the violated or not secure zones.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top