Logging users

M1 Support Forum Logging users

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #5835
    Steve Jacobson

    I have a customer who has an electronic gate that is controlled by an M1KAM module.  The input to the KAM is a Viking keypad/Prox Reader that sends a Weigand code to the KAM.  All that works perfectly.

    I would like to log the user who entered a code on the KAM keypad.  The M1G doesn’t seem to do this logging.

    Is there any way to log which user keyed in their code on the keypad?  It also would be nice to have a voice announcement:  “User xxx opened the gate”.

    How can I do this?

    Thanks in advance

    #5837
    Brad Weeks

    Are the 26 Bit Wiegand Codes from the Viking programmed into the M1 as a User with “Access” checked as the User Authorization? If so the M1 will log when that Code as “Access” Keypad X (X = Address of the keypad).

    #5838
    Steve Jacobson

    The “Access” is checked, but the system isn’t logging the user.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Scroll to Top