Alarm Engine Support Forum M1 temp sensors

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #8025
    Keith Belt

      The M1 allowed connecting temperture sensors to the main board.  Will these work on the E27?

      #8026
      Michael Burrell

        Keith,

        Currently the E27 does not support the use of zone temp sensors in the way that M1 does. The E27 can not display temperature via its onboard inputs.

        If it add this feature in the future it will need to be an expansion board.

        Thanks,

        Mike

        #8027
        Keith Belt

          That was a nice feature.  All our homes have temp sensors in the garage and attic.  It comes in handy when summer time can reach 120 in the shade, to be able to remotely check the house and other areas.  With outputs controlling sprinklers, we had rules for that timing, which we could adjust based on outside temperature – on the hottest days we’d water more often

          From what I can tell the new E27 keypad also lacks a built-in temp sensor.

          I would buy whatever expanison board adds temp monitoring capability.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.
        Scroll to Top