M1Gold Status "AC Failure" when no failure has occurred - ELK Products

This topic has 1 reply, 1 voice, and was last updated December 7, 2020 at 5:10 pm by M1 Installer.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
December 7, 2020 at 10:28 am #4423
M1 Installer
The power from the transformer at the M1Gold Terminals reads 19.8v ElRP2 2.0.24, M1Gold 5.3.8
December 7, 2020 at 5:10 pm #4510
M1 Installer
My bad! I removed a supervised power supply some time ago and did not disable that zone. Not sure why I just noticed the “AC Failure”.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.