Mount M1 and accessories in non Elk enclosure

M1 Support Forum Mount M1 and accessories in non Elk enclosure

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #5718
    Bryan Johnson

    Is there a way to mount a M1 board, expansion boards and other accessories in a non Elk enclosure?

    it’s a large custom house that will need the space of a 48” Leviton enclosure, but the mounting holes do not line up.

    #5745
    Terry Lockhart

    Hello Bryan,

    We are doing the same thing.  You need to mount the M1G by either supplying an interface plate or just tapping the mounting holes in the back of the can to accept the mounting screws.

    All the other accessory pieces need to have the adapter plates for the other boards or standoffs depending on your situation.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Scroll to Top