› M1 Support Forum › Thermostats not enabled on keypad › Reply To: Thermostats not enabled on keypad
June 18, 2022 at 12:38 pm
#6182
Trenton Wilson
Thermostats are reporting their Temperatures and the elk still shows not enabled I disconnected the Data wire and left the power wire and the xsp just cycles through the C commands on all 7 thermostats,
I swapped the data wires and got the same results, I reconnected the data wire proper and and the thermostats went through and reported everything including their Temperatures as per usual and the last thing it lands on is netlk and I tried both enabled and disable and get not enabled on the keypad on both configurations so what do I need to configure on the elk to get it to enable the thermostats?