M1 Support Forum Bypassing zone after system armed then xone violated

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #7711
    Timothy Danko

      I’d appreciate some guidance on the following scenario.

      1) ELKM1 is armed in Away mode with 180 second arming delay

      2) Garage door (Zone 5) is open, car leaves garage, and garage door is closed

      3) ELKM1 complted arming in AWay mode

      4) Garage door (one 5) is opened because an item has been forgotten and car returns to garage

      5) ELKM1 is triggered and alarm sounds inside the house

      Here are the key questions.

      1) Can I bypass or reset the garage door zone (after violating the zone) without the need to disarm and rearm the ELKM1?

      2) If so, can I re-arm the garage door zone allowing time for leave the garage and close the door?

      I hope this is clear.  Thanks in advance for your help.

      Tim

       

      #7729
      Brad Weeks

        During the Exit and Entry Delays is not not possible to Bypass a Zone. You will need to disarm the system.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top