M1 Support Forum Card Reader / Wiegand Output

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4307
    M1 Installer

      Hi, What is the M1KAM / Keypad / M1 panel’s reaction to wiegand reads of greater than 26 bit format?

      For example, a reader such as a HID RP40 would often output 26-bit wiegand data from cards so configured, but might also output a longer spill of wiegand data for card reads like an ISO14443 UID / Card Serial Number where it might output 32 bits, 34 bits, etc. In an ideal world, the panel would receive the wiegand spill and discard all but the last and take the relevant last (least significant bit) fields to contrive a 26-bit wiegand spill and process based on that, but I wondered what the panel / keypad / M1KAM would actually do?

      #4470
      ELK Tech Support

        The M1 System supports 26 Bit Wiegand and would not be able to read or respond to other formats.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top