- This topic has 1 reply, 2 voices, and was last updated September 30, 2024 at 1:43 pm by Brad Weeks.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
i am trying to connect this belkin router has elk listed as 192.168.2….. the m1xep is using port 2601 and the UD sopware wont conect to the m1ez8 . what am i missing or doing wrong thanks
Brad Weeks
Connect with the ElkRP2 Software and under the M1XEP Setup, TCP/IP Setting Check “Enable Non-Secure Port 2101” and click Send. Within the UD software have it connect to the Non-Secure Port 2101
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.