Elk-M!KP No Power - ELK Products

This topic has 5 replies, 2 voices, and was last updated June 27, 2023 at 4:19 pm by Brad Weeks.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
June 15, 2023 at 10:56 am #6970
Mikael Anderson
I have 3 keypads and one died (no power). Any thoughts on trouble shooting or do I need a new kepy pad?
June 15, 2023 at 1:03 pm #6972
Brad Weeks
Measure the voltage across the RED to the BLACK wire on the keypad wiring harness. You should measure ~12 – 14 VDC.
June 20, 2023 at 11:57 am #7082
Mikael Anderson
If it doesn’t what does that mean?
June 22, 2023 at 4:56 pm #7100
Brad Weeks
Temporarily move the non-working keypad to a working keypad location and if it doesn’t work then the issue is within the keypad
June 27, 2023 at 12:52 pm #7104
Mikael Anderson
Is is common that a keypad could just die?
June 27, 2023 at 4:19 pm #7105
Brad Weeks
No not common for keypad or other bus devices to stop working. The system could have taken a surge.
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.