- This topic has 0 replies, 1 voice, and was last updated October 4, 2023 at 11:56 am by Geoff Starkey.
Viewing 1 post (of 1 total)
-
Posts
-
Anyone have experience with setting up the M1XSP to control a centralite elegance lighting system?
The M1XSP shows up on the bus enroll and made sure the default firmware 1.0.48
I have the jumpers set and put in all of the IDs on the lighting page but can’t get it to control the centralite. It is an older M1XSP so not sure if that device is faulty or just missing something.
The Jumpers are set as J5-J8 – 1110
I connected to the centralite and made sure RS232 2 is set to 19,200 baud
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.