Alarm Engine Support Forum Replacement 2-way antenna

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #8554
    Keith Belt

      The small daughterboard that goes on the E7 for ELK 2-way sensor communications, comes with a small antenna, basically just a stiff wire about 6 inches long.  I lost it during installation.  It’ll probably work just fine with any wire, but I don’t want the client to see a hokey jury-rig, so wanted to see if that was available separately as a replacement spare part.  I wasn’t able to find anyone selling one alone online and didn’t see individual spare parts like that in the catalog.

      #8584
      Michael Burrell

        Keith – can you email me your ship to address at michael.burrell@elkproducts.com and I will have a few of these mailed out to you. I assume you need the ones that go in the control panel and not the ones that go on the AEXRFA? There difference is the ones for the panel are straight and the ones for the AEXRFA are bent to handle the offset of the housing.

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.
      Scroll to Top