- This topic has 1 reply, 2 voices, and was last updated April 6, 2023 at 3:38 pm by Brad Weeks.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
If you have physical access to the system, is there a way to factory reset & return the installer code to default value ?
I think I saw a thread where someone suggested this was possible with a serial cable.
I know I saw someone else state they had to return the panel to Elk to be reset.
Just wondering what my options are.
Brad Weeks
To Default the M1 you will need the original Installer Code (172839 Factory Default) in order to access Menu 9 – Installation Programming, 07 – Global System Definitions, G45 Default Control, 99 Default All. If you do not have the Installer Code you can try to connect with ElkRP2, Receive ALL and under Globals G29 – G42 you will see Local Installer Programming Code.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.