- This topic has 1 reply, 2 voices, and was last updated May 25, 2022 at 12:45 pm by Brad Weeks.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I have an M1G with hardware version 0.11, boot version 3.1.15 and firmware 4.3.12. To upgrade the firmware to version 4.6.8, do I first update the boot version to 3.3.2, then update the boot version again to 3.3.6 and then finally update the firmware to 4.6.8? Or must I update to boot version 3.3.2, and then update to a compatible firmware (e.g. v4.5.x), before I attempt to install boot version 3.3.6 / firmware 4.6.8? Thanks.
Brad Weeks
Yes you will need to update the Bootware from 3.1.x to 3.3.2 then to 3.3.6 before updating the Firmware to 4.6.8 or 5.3.10
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.