M1 16 Zone Input Expander

ELK-M1XIN

Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.

ELK-M1XIN

Product Details

• 16 EOL Resistor Supervised Hardwire Zones
• Operates on the 4-Wire Data Bus
• DIP Switch Address Settings
• Flash Memory for Firmware Updating
• Plug-In Terminal Strips
• Status and Diagnostic LED
• On-Board EOL Bus Termination Jumper
• Vertical Mounting using ELK-SWG Glides(included)

• Inputs: Plug-In Terminals with Elevator Style Wire Clamps and Screws
• Operating Power Range: 9 to 14 VDC
• Current Draw: 65 mA
• Size: 6" x 3.25" x .75" H

Resources

• 16 Zone Input Expander
• ELK-SWG Circuit Board Mounting Glides 2/pack
• 18 2200 Ohm Resistors
• Instructions

ELK-W018B - 4-Pin Ribbon Cable - Used for connecting expanders and other peripherals to the M1 Control.

M1 Data Bus Hubs

Locate an ELK Authorized Distributor Near You!

For more infomation, call ELK at (800) 797-9355.